Work Support Jacks
The Jergens Spring Loaded Work Jacks provide consistent support and rigidity to odd shaped workpieces. They are designed to prevent workpiece deflection under forces created during machining operations. Precision mated locking jaws grip the jackpost from both sides creating a vise-like action.
- Load capacities 300-4500 lbs.
- Rugged design
- Quality construction
- Dual jaw locking action
- Rubber boot or dust cap models available
- Related Products and Accessories
- Part Drawings
- Product Literature
Click the Part Number
in below chart
for Price and Stock Check.
 CAD Download Link |
|
| 300 lbs | Cap | Slotted, See Line Drawing | - | - | - | - | - | - | - | - | 1.75 | +/-0.19 |
| 1400 lbs | Cap | 0.750 Hex | 3.75 | 2.00 | 2.00 | 3.00 | 1.38 | 11/32 | 1.13 | 3/8-16 0.44 Deep | 3.31 | +/-0.25 |
| 2500 lbs | Cap | 0.750 Hex | 3.75 | 2.00 | 1.12 | 3.00 | 1.38 | 11/32 | 0.56 | 3/8-16 0.44 Deep | 2.38 | +/-0.25 |
| 4500 lbs | Cap | 0.937 Hex | 4.54 | 2.50 | 2.50 | 3.50 | 1.88 | 13/32 | 1.63 | 1/2-13 0.59 deep | 4.13 | +/-0.38 |
Jergens work supports (25201, 25203, 25207, 25205) are designed for use as a secondary support and are not intended to be clamped directly over as you would with a fixed locator. To avoid part movement work supports should be actuated and locked out only after all clamps have been secured. This procedure will minimize any movement that may occur when tightening the work support to the desired torque. When described procedure is followed work supports can be expected to hold tolerances as tight as .001”-.002”.
Unless otherwise stated, English units are inches (in) and pounds (lbs) and Metric units are millimeters (mm) and kilograms (kg).
